Micron – BestPOS Online Store

Micron MTA36ASF4G72PZ-3G2R 32GB 3200Mhz DDR4 RDIMM Memory

admin — Thu, 08 May 2025 07:57:26 +0000

Micron Server and Workstation Memory undergo a detailed 34-stage manufacturing process to ensure that it meets or exceeds the performance demands of virtualization, cloud, big data and hyper-scale computing. This extra emphasis on quality and reliability boosts system performance and minimizes costly downtime. Optimized for the latest Intel® and AMD® processor product families, these memory modules are 100% component and module tested to mission-critical server standards.

Preserve critical data in the event of a power loss with on-module NAND. Maximize memory performance with the highest level of data integrity and get more out of your servers. Safeguard data during power loss, remove I/O bottlenecks that are holding your servers back, and increase the performance of demanding server applications. At a fraction of the cost of a new system, a memory upgrade is one of the most affordable ways to increase performance.

FEATURES:

32GB DDR4
288-pin registered dual in-line memory module (RDIMM)
Fast data transfer rates
Supports ECC error detection and correction
Nominal and dynamic on-die termination
Low-power auto self-refresh
Dual Rank

SPECIFICATIONS:

Density: 32GB
Speed: DDR4-3200
CAS Latency: 22
Extended Timings: 22-22-22
Form Factor: RDIMM
Voltage: 1.2V
ECC: ECC
Module Rank: 2R
Config: x4
Colour: Green
Dimensions: 13.4 x 0.4 x 3.1 cm
Weight: 25g

WHAT’S IN THE BOX:

Micron MTA36ASF4G72PZ-3G2R 32GB 3200MHz DDR4 RDIMM Server Memory x1

Micron MTA36ASF4G72PZ-3G2R1R 32GB 3200Mhz DDR4 RDIMM

admin — Thu, 08 May 2025 07:57:02 +0000

FEATURES:

32GB DDR4
288-pin registered dual in-line memory module (RDIMM)
Fast data transfer rates
Supports ECC error detection and correction
Nominal and dynamic on-die termination
Low-power auto self-refresh
Dual Rank

SPECIFICATIONS:

Density: 32GB
Speed: DDR4-3200
CAS Latency: 22
Extended Timings: 22-22-22
Form Factor: RDIMM
Voltage: 1.2V
ECC: ECC
Module Rank: 2R
Config: x4
Colour: Green
Dimensions: 13.4 x 0.4 x 3.1 cm
Weight: 25g

WHAT’S IN THE BOX:

Micron 32GB 3200MHz DDR4 RDIMM Server Memory x1

Micron MTA18ASF2G72PDZ-3G2R1R 16GB 3200Mhz DDR4 RDIMM Memory

admin — Thu, 08 May 2025 07:56:58 +0000

Micron Server and Workstation Memory undergoes a meticulous 34-stage manufacturing process to guarantee that it not only meets but also surpasses the performance requirements of virtualization, cloud computing, big data, and hyper-scale computing. The increased focus on quality and reliability enhances system performance and reduces expensive downtime. These memory modules are designed to be compatible with the latest Intel® and AMD® processor product families. They have undergone thorough testing to ensure their reliability and performance, meeting the standards required for mission-critical server applications.

Ensure the preservation of critical data in the event of a power loss by utilising on-module NAND. Optimise memory performance by ensuring the highest level of data integrity, thereby maximising the efficiency of your servers. Ensure data protection during power outages, eliminate I/O bottlenecks that hinder server performance, and enhance the efficiency of resource-intensive server applications.

FEATURES:

16GB DDR4 Functionality
288-pin registered dual in-line memory module (RDIMM)
Fast data transfer rates
Supports ECC error detection and correction
Nominal and dynamic on-die termination
Low-power auto self-refresh
Dual Rank
On-board I2C temperature sensor with integrated serial presence-detect

SPECIFICATIONS:

Density: 16GB
Speed: DDR4-3200
CAS Latency: 22
Extended Timings: 22-22-22
Form Factor: RDIMM
Voltage: 1.2V
ECC: ECC
Module Rank: 2R
Config: x8
Colour: Green
Dimensions: 13.4 x 0.4 x 3.1 cm
Weight: 20g

WHAT’S IN THE BOX:

Micron 16GB 3200MHz DDR4 RDIMM Dual Rank Server Memory x1

Micron 5400 PRO 7.68TB SATA 2.5″ SSD Non-SED

admin — Thu, 08 May 2025 07:56:52 +0000

The Micron® 5400 series is a groundbreaking data center SATA SSD that utilises 3D 176-layer TLC NAND technology. It offers significantly improved reliability, with a 50% increase compared to standard data center SATA drives. Additionally, it boasts 67% more endurance, making it a highly durable option. The Micron® 5400 is available in various capacities, including 7.68TB, making it a leader in its class. The 5400 is Micron’s 11th generation of data center SATA SSDs, known for its proven architecture that provides peace of mind, unmatched reliability, and long-lasting performance. It is also built on the industry’s widest range of offerings. Make your data center transition to flash-based storage easier by using our advanced data center SATA SSD. It offers the stability and performance that you expect from the industry’s best.

FEATURES:

Improve Application Storage Performance
High-speed SATA (6 Gb/s) Interface
Power loss signal support and power hold-up circuit
Up to 540MB/s Read and 520MB/s Writing Speeds
7680GB Capacity
TCG-Enterprise hardware encryption

SPECIFICATIONS:

Capacity: 7680GB
Sequential Read: 540 MB/s
Sequential Write: 520 MB/s
4KB Random Read: 93K IOPS
4KB Random Write: 10.5K IOPS
Form Factor: U.3 7mm
Interface: SATA (6 Gb/s)
MTTF: 3 million hours
SSD Endurance: 9110 TBW
Operating Temperature: 0°C to 70°C
Compliance: CE, FCC, UL/cUL, BSMI, RCM, KC RRL, W.E.E.E, TUV, VCCI, IC, Morocco, UkrSEPRO, UKCA
Certifications: PCI-SIG
Product Dimensions: 6.9 x 10 x 0.7 cm
Product Weight: 70g

WHAT’S IN THE BOX:

Micron 5400 Pro 7680GB 2.5″ SATA SSD x1

Micron 5400 MAX 1.92TB SATA 2.5″ SSD Non-SED

admin — Thu, 08 May 2025 07:56:52 +0000

The Micron® 5400 series is a groundbreaking data centre SATA SSD that utilises 3D 176-layer TLC NAND2 technology. It offers significantly improved reliability, with a 50% increase compared to standard data centre SATA drives3. Additionally, it boasts 67% more endurance, making it a highly durable option. The Micron® 5400 is available in various capacities, ranging from 240GB to an impressive 7.68TB4, making it a leader in its class. The 5400 is Micron’s 11th generation of data centre SATA SSDs, known for its proven architecture that provides peace of mind, unmatched reliability, and long-lasting performance. It is built on the industry’s widest range of offerings. Make your data centre transition to flash-based storage easier by using our advanced data centre SATA SSD. It offers the stability and performance that you expect from the industry’s best.

FEATURES:

Improve Application Storage Performance
High-speed SATA (6 Gb/s) Interface
Power loss signal support and power hold-up circuit
Up to 540MB/s Read and 520MB/s Writing Speeds
1920GB Capacity
AES 256-bit encryption

SPECIFICATIONS:

Capacity: 1920GB
Sequential Read: 540 MB/s
Sequential Write: 520 MB/s
4KB Random Read: 94K IOPS
4KB Random Write: 63K IOPS
Form Factor: 2.5″ 7mm
Interface: SATA (6 Gb/s)
MTTF: 3 million hours
SSD Endurance: 17520 TBW
Operating Temperature: 0°C to 70°C
Compliance: CE, FCC, UL/cUL, BSMI, RCM, KC RRL, W.E.E.E, TUV, VCCI, IC, Morocco, UkrSEPRO, UKCA
Certifications: SATA-IO
Product Dimensions: 69.85 mm x 100.45 mm x 7 mm
Product Weight: 70 g

WHAT’S IN THE BOX:

Micron 5400 Max 1920GB SATA SSD (2.5″) – Black x1

Micron 5400 PRO 1.92TB SATA 2.5″ SSD Non-SED

admin — Thu, 08 May 2025 07:56:52 +0000

The Micron® 5400 series is a groundbreaking data center SATA SSD that utilises 3D 176-layer TLC NAND technology. It offers significantly improved reliability, with a 50% increase compared to standard data center SATA drives. Additionally, it boasts 67% more endurance, making it a highly durable option. The Micron® 5400 is available in various capacities, including 1.92TB, making it a leader in its class. The 5400 is Micron’s 11th generation of data center SATA SSDs, known for its proven architecture that provides peace of mind, unmatched reliability, and long-lasting performance. It is also built on the industry’s widest range of offerings. Make your data center transition to flash-based storage easier by using our advanced data center SATA SSD. It offers the stability and performance that you expect from the industry’s best.

FEATURES:

Improve Application Storage Performance
High-speed SATA (6 Gb/s) Interface
Power loss signal support and power hold-up circuit
Up to 540MB/s Read and 520MB/s Writing Speeds
1920GB Capacity
AES 256-bit encryption

SPECIFICATIONS:

Capacity: 1920GB
Sequential Read: 540 MB/s
Sequential Write: 520 MB/s
4KB Random Read: 95K IOPS
4KB Random Write: 37K IOPS
Form Factor: U.3 7mm
Interface: SATA (6 Gb/s)
MTTF: 3 million hours
SSD Endurance: 0.65 – 1.5 DWPD
Operating Temperature: 0°C to 70°C
Compliance: CE, FCC, UL/cUL, BSMI, RCM, KC RRL, W.E.E.E, TUV, VCCI, IC, Morocco, UkrSEPRO, UKCA
Certifications: PCI-SIG
Product Dimensions: 6.9 x 10 x 0.7 cm
Product Weight: 70g

WHAT’S IN THE BOX:

Micron 5400 Pro 1920GB 2.5″ SATA SSD x1

Micron 5400 PRO 3.84TB SATA 2.5″ SSD Non-SED

admin — Thu, 08 May 2025 07:56:49 +0000

The Micron® 5400 series is a groundbreaking data center SATA SSD that utilises 3D 176-layer TLC NAND technology. It offers significantly improved reliability, with a 50% increase compared to standard data center SATA drives. Additionally, it boasts 67% more endurance, making it a highly durable option. The Micron® 5400 is available in various capacities, including 3.84TB, making it a leader in its class. The 5400 is Micron’s 11th generation of data center SATA SSDs, known for its proven architecture that provides peace of mind, unmatched reliability, and long-lasting performance. It is also built on the industry’s widest range of offerings. Make your data center transition to flash-based storage easier by using our advanced data center SATA SSD. It offers the stability and performance that you expect from the industry’s best.

FEATURES:

Improve Application Storage Performance
High-speed SATA (6 Gb/s) Interface
Power loss signal support and power hold-up circuit
Up to 540MB/s Read and 520MB/s Writing Speeds
3840GB Capacity
TCG-Enterprise hardware encryption

SPECIFICATIONS:

Capacity: 3840GB
Sequential Read: 540 MB/s
Sequential Write: 520 MB/s
4KB Random Read: 95K IOPS
4KB Random Write: 30K IOPS
Form Factor: 2.5″ 7mm
Interface: SATA (6 Gb/s)
MTTF: 3 million hours
SSD Endurance: 10512 TBW
Operating Temperature: 0°C to 70°C
Compliance: CE, FCC, UL/cUL, BSMI, RCM, KC RRL, W.E.E.E, TUV, VCCI, IC, Morocco, UkrSEPRO, UKCA
Certifications: PCI-SIG
Product Dimensions: 6.9 x 10 x 0.7 cm
Product Weight: 70g

WHAT’S IN THE BOX:

Micron 5400 Pro 3840GB 2.5″ SATA SSD x1

Micron 5400 PRO 960GB SATA 2.5″ SSD Non-SED

admin — Thu, 08 May 2025 07:56:46 +0000

The Micron® 5400 series is a groundbreaking data center SATA SSD that utilises 3D 176-layer TLC NAND technology. It offers significantly improved reliability, with a 50% increase compared to standard data center SATA drives. Additionally, it boasts 67% more endurance, making it a highly durable option. The Micron® 5400 is available in various capacities, including 960GB, making it a leader in its class. The 5400 is Micron’s 11th generation of data center SATA SSDs, known for its proven architecture that provides peace of mind, unmatched reliability, and long-lasting performance. It is also built on the industry’s widest range of offerings. Make your data center transition to flash-based storage easier by using our advanced data center SATA SSD. It offers the stability and performance that you expect from the industry’s best.

FEATURES:

Improve Application Storage Performance
High-speed SATA (6 Gb/s) Interface
Power loss signal support and power hold-up circuit
Up to 540MB/s Read and 520MB/s Writing Speeds
960GB Capacity
TCG-Enterprise hardware encryption

SPECIFICATIONS:

Capacity: 960GB
Sequential Read: 540 MB/s
Sequential Write: 520 MB/s
4KB Random Read: 95K IOPS
4KB Random Write: 37K IOPS
Form Factor: 2.5″ 7mm
Interface: SATA (6 Gb/s)
MTTF: 3 million hours
SSD Endurance: 1324 TBW
Operating Temperature: 0°C to 70°C
Compliance: CE, FCC, UL/cUL, BSMI, RCM, KC RRL, W.E.E.E, TUV, VCCI, IC, Morocco, UkrSEPRO, UKCA
Certifications: SATA-IO
Product Dimensions: 6.9 x 10 x 0.7 cm
Product Weight: 70g

WHAT’S IN THE BOX:

Micron 5400 Pro 960GB 2.5″ SATA SSD x1

Micron MTA18ASF2G72AZ-3G2R1R 16GB 3200MHz DDR4 ECC UDIMM Memory

admin — Thu, 08 May 2025 07:55:07 +0000

Maximise the performance of your applications and optimise your IT budget by using Micron Server DRAM. One of the simplest and most cost-effective methods to enhance the speed and efficiency of your deployments is by maximising the installed memory capacity. By installing Micron Server DRAM, you can enhance the performance of your CPUs and optimise the computing potential of your servers. Memory is typically a fixed (non-shared) component that often poses a greater performance constraint compared to processors or storage drives, which have the ability to be shared. Maximise your investment in server infrastructure by boosting memory capacity.

Micron DRAM offers a cost-effective solution to enhance the longevity and efficiency of your current infrastructure, allowing you to maximise the potential of your existing systems without the need for expensive new servers. You can save money by purchasing new servers with minimal pre-installed memory and then upgrading to the maximum memory capacity using Micron Server DRAM, even if you need to replace existing servers.

FEATURES:

16GB DDR4
Optimized for the latest Intel® and AMD® processor product families
100% component and module tested to mission-critical server standards
Engineered for cost-effective performance in workstations and entry-level servers
Available in multiple capacities and configurations
Ideal for office applications, designing digital media, editing videos or hosting web content

SPECIFICATIONS:

Density: 16GB
Speed: DDR4-3200
CAS Latency: 22
Extended Timings: 22-22-22
Form Factor: ECC UDIMM
Voltage: 1.2V
Module Rank: 2R
Config: 2×8
Colour: Green
Dimensions: 3.1 x 13.3 x 0.4 cm
Weight: 20g

WHAT’S IN THE BOX:

Micron 16GB 3200MHz DDR4 ECC UDIMM Memory x1

Micron MTA18ASF4G72AZ-3G2R 32GB 3200MHz DDR4 ECC UDIMM Memory

admin — Thu, 08 May 2025 07:54:19 +0000

Maximise the performance of your applications and optimise your IT budget by using Micron Server DRAM. One of the simplest and most cost-effective methods to enhance the speed and efficiency of your deployments is by maximising the installed memory capacity using Micron Server DRAM. By installing Micron Server DRAM, you can enhance the performance of your CPUs and optimise the computing potential of your servers. Memory is typically a fixed (non-shared) component that often poses a greater performance constraint compared to processors or storage drives, which have the ability to be shared. Maximise your investment in server infrastructure by boosting memory capacity.

FEATURES:

32GB DDR4
Optimized for the latest Intel® and AMD® processor product families
100% component and module tested to mission-critical server standards
Engineered for cost-effective performance in workstations and entry-level servers
Available in multiple capacities and configurations
Ideal for office applications, designing digital media, editing videos or hosting web content

SPECIFICATIONS:

Density: 32GB
Speed: DDR4-3200
CAS Latency: 22
Extended Timings: 22-22-22
Form Factor: ECC UDIMM
Voltage: 1.2V
Module Rank: 2R
Config: 1Rx4
Colour: Green
Dimensions: 31.25 x 133.35 x 3.9 mm
Weight: 20g

WHAT’S IN THE BOX:

Micron 32GB 3200MHz DDR4 ECC UDIMM Memory – Green x1